PVC Coated 45-Degree Liquidtight Connectors

Calbond® PVC coated liquidtight connectors are used with Liquidtight Conduit. The sleeve on the liquidtight connector is sized specifically to tighten around PVC conduit. Pulling compound is recommended for ease of installation. Fittings are provided with a flexible sleeve on the conduit side and a sealing form on both the box side and the mating part of the gland.

Features

  • Exterior PVC coating thickness is a minimum 0.040″
  • Interior Urethane coating thickness is a minimum 0.002″
  • Sizes available are 1/2″ to 4″
  • The length of the sleeve extension(s) shall be at least equivalent to the nominal conduit size for sizes 1/2″- 2″
  • For sizes 2-1/2″- 4″, the length of the sleeve extension(s) shall be at least 2″
  • Available in straight, 45-degree or90-degree body configurations

Standards

  • UL Standard 514B
  • CSA Standard: C22.2 No. 18

PVC Coated 45 Degree Liquidtight Connectors

Item NumberTrade Size (in)ABCWeight Per 100 (lbs)
PV0500LT50451/21.462.380.5630
PV0300LT38453/81.241.940.5630
PV0700LT75453/41.742.880.5640
PV1000LT1004511.963.250.7550
PV1500LT150451-1/22.84.880.81120
PV1200LT125451-1/42.3640.81150
PV2000LT2004523.335.880.88200
PV2500LT250452-1/23.836.251300
PV3000LT3004534.586.251420
PV4000LT4004545.586.631.13620

45 Degree Liquidtight Connectors - with Ground

Item NumberTrade Size (in)ABCWeight Per 100 (lbs)Ground Wire
PV0500LT5045G1/21.462.380.563014 - 8
PV0300LT3845G3/81.241.940.563014 - 8
PV0700LT7545G3/41.742.880.564014 - 4
PV1000LT10045G11.963.250.755014 - 4
PV1500LT15045G1-1/23.334.880.8112014 - 4
PV1200LT12545G1-1/43.334.630.8115014 - 4
PV2000LT20045G23.895.880.8820014 - 4
PV2500LT25045G2-1/24.526.2513001/0-8
PV3000LT30045G35.276.2514201/0-8
PV4000LT40045G46.216.631.136203/0-6