PVC Coated C Form Conduit Bodies

Calbond® offers the full line of Form 7 PVC coated conduit bodies. All fittings are supplied with PVC coated cast iron covers. The sleeved threaded ends offer complete protection against corrosion while maintaining full ground continuity throughout the installed system.

Features

  • Exterior PVC coating thickness is a minimum 0.040″
  • Interior urethane coating thickness is a minimum 0.002″
  • Specialized corrosion resistant coating provided on threads
  • Sizes available are 1/2″ to 3″
  • Fittings are supplied with plastic encapsulated stainless steel screws

Standards

  • UL Listed Standard 514B
  • CSA Standard: C22.2 No. 18

PVC Coated C Form 7 Conduit Bodies

Item NumberTrade Size (in)Metric Size (mm)ABCDEWeight Per 100 (lbs)
Steel
PV0500C171/2166.381.421.460.943.19100
PV0700C273/421751.671.641.133.81140
PV1000C3712791.921.831.384.5220
PV1200C471-1/4359.942.352.271.755270
PV1500C571-1/24111.192.62.521.945.44400
PV2500C772-1/263143.674.333.568.381000
PV2000C6725311.193.173.082.446.38550
PV3000C8737813.754.424.333.568.381180
Aluminum
PA0500C17SA1/2166.381.421.460.943.19Contact Factory
PA0700C27SA3/421751.671.641.133.81Contact Factory
PA1000C37SA12791.921.831.384.5Contact Factory
PA1200C47SA1-1/4359.942.352.271.755Contact Factory
PA1500C57SA1-1/24111.192.62.521.945.44Contact Factory
PA2000C67SA25311.193.173.082.446.38Contact Factory
PA2500C77SA2-1/263143.674.333.568.38Contact Factory
PA3000C87SA37813.754.424.333.568.38Contact Factory